We fix what's broken, fast, and we don't disappear after the invoice. Emergency dispatch available across Kenmore and the surrounding zip codes.
Our Kenmore dispatcher asks a few quick questions to gauge urgency and get you the fastest available window.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
Warranty details are explained clearly so you know exactly what's covered going forward.
Leonard HVAC didn't start as a franchise chasing volume. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Kenmore, WA.
We're not interested in being the cheapest quote on the page — we're the crew that answers the phone at 2am when your furnace quits in the middle of a cold snap. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, big or small.
Kenmore's climate swings hard, and generic national playbooks don't always fit. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Too many homeowners in Kenmore have a story about a tech who showed up late, quoted one price, and charged another. That's the gap we built Leonard HVAC to close. We'd rather lose a job to a lower bid than win one by cutting corners on the diagnosis, because a customer who trusts us once tends to call us again — and Kenmore is a small enough community that reputation travels fast.
That local context saves time on every call, because we're not starting from zero on basic questions about your neighborhood or your system. Our warranty and service history records stay attached to your address, so any future technician who visits already has the full picture.
We cover the full range of heating, cooling, and air quality work Kenmore properties actually need.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Kenmore dispatch team moves emergency tickets to the front of the schedule so a technician is diagnosing your system as fast as physically possible.
We keep the truck stocked with the parts that fail most often on the equipment common to Kenmore homes, which is exactly why most repairs don't require a return visit.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Kenmore homeowners through load calculations so the new system is sized correctly for the actual square footage before a single piece of equipment gets ordered.
Most installs in Kenmore are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services rooftop units and package systems across Kenmore, with priority response for facilities that can't afford downtime.
Property managers working with multiple Kenmore locations can set up a standing account so every site gets consistent service history and pricing.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle humidifier, dehumidifier, and air purifier installation for Kenmore households that want more than just temperature control.
We'll show you photos of anything concerning we find, along with a plain-language explanation of what it means and whether it's urgent.
We'd rather set clear expectations upfront than make vague promises we can't back up.
Details vary by job type and are always shared upfront, never buried in fine print.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
Our office follows up after major repairs and installs to confirm everything is holding.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
Rattling during startup often means a component has worked itself loose and needs tightening before it causes real damage.
This is one of the most common complaints we hear on service calls across Kenmore.
A tune-up often identifies exactly what's driving the extra energy use.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
You'll know the cost before a wrench touches your system.
Because our trucks are stationed near Kenmore, we're rarely far from your address.
Parts and labor are backed by warranty terms explained in plain language.
Our techs recognize brand-specific quirks instead of learning your system on the job.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
Every review below reflects an actual service call in the Kenmore area.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. Fixed on the first visit and explained everything in terms I could actually understand."
"We've used them for our maintenance plan for two years now and never had a surprise breakdown. You can tell these guys actually know what they're doing."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. Followed up a week later just to check everything was still running fine."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Kept our kitchen running through the weekend rush."
"The estimate matched the final invoice exactly, down to the dollar. Would use them again without hesitation."
"Diagnosed a failed capacitor and had it swapped within the hour. Genuinely relieved to have found a crew that answers when it matters."
Understanding what typically fails helps homeowners know what to watch for and when a repair call is worth making before things get worse.
Homeowners who schedule a tune-up ahead of each season tend to call us far less often for emergency repairs. Before the heaviest cooling months hit, it's worth having the refrigerant charge checked, the condenser coils cleaned, and the filter replaced — all of which directly affect how hard the compressor has to work.
Setting a programmable or smart thermostat to a consistent schedule reduces the number of times the system has to work hard to catch up to a big temperature swing. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Our technicians train across the major residential and commercial equipment lines, so you're not limited to a single brand's service network. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Manufacturer-certified across multiple major residential equipment lines.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Experienced with the light industrial and retail equipment common across the area.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
Our policy is simple: you approve the number before we touch the system.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
Every technician we send is licensed in accordance with Kenmore, WA requirements and carries full liability coverage.
Our technicians walk you through the actual numbers — repair cost versus remaining system life versus new equipment efficiency — before making a recommendation.
Yes, our maintenance plans include seasonal tune-ups, priority scheduling, and discounted repair rates for members.
We cover Kenmore and the surrounding communities, including the zip codes listed in our coverage section below.
Property managers and business owners can request a dedicated point of contact for ongoing service.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
Ask about financing during your in-home estimate to see what fits your situation.
Most Kenmore homes benefit from two tune-ups a year — one before cooling season and one before heating season.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
Ask about current after-hours rates when you call +1-866-805-8548.
Straightforward fixes like a capacitor swap or a thermostat replacement are often finished in well under an hour.
For commercial accounts or rental properties, a designated point of contact or property manager can coordinate access instead.
Our technicians are familiar with both, which means less time spent figuring out your specific setup and more time actually fixing the problem.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Kenmore.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Kenmore installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
Coverage extends across Kenmore proper and into the nearby zip codes listed below.
Property managers with multiple Kenmore addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
