We fix what's broken, fast, and we don't disappear after the invoice. Same-day appointments available across Kenmore and the surrounding zip codes.
Call +1-866-805-8548 and describe what your system is doing — the symptoms help us send a tech prepared with the right parts.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Warranty details are explained clearly so you know exactly what's covered going forward.
Leonard HVAC grew one honest service call at a time in communities like Kenmore. We invest in ongoing training so our techs recognize a failing capacitor, a cracked heat exchanger, or a refrigerant leak before it turns into an emergency.
We're not interested in being the cheapest quote on the page — we're the crew that answers the phone at 2am when your furnace quits in the middle of a cold snap. We carry the credentials Kenmore inspectors and property managers expect to see, and we keep that documentation available on request for every job, routine or emergency.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. We'd rather lose a job to a lower bid than win one by cutting corners on the diagnosis, because a customer who trusts us once tends to call us again — and Kenmore is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Kenmore rooftop unit. Our warranty and service history records stay attached to your address, so any future technician who visits already has the full picture.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
Breakdowns rarely happen at a convenient time, which is exactly why our emergency line runs 24 hours a day. Our Kenmore dispatch team moves emergency tickets to the front of the schedule so a technician is diagnosing your system as fast as physically possible.
We keep the truck stocked with the parts that fail most often on the equipment common to Kenmore homes, which is exactly why most repairs don't require a return visit.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Kenmore homeowners through financing and rebate options where available before a single piece of equipment gets ordered.
Most installs in Kenmore are completed in a single day, and we walk you through the new thermostat and any app controls before we leave.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services rooftop units and package systems across Kenmore, with after-hours work to avoid disrupting business.
Our commercial techs are trained to work around your customers and staff, scheduling noisy or disruptive work outside peak hours whenever possible.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Kenmore households that want more than just temperature control.
Maintenance plan members in Kenmore get scheduling reminders automatically, so tune-ups don't fall through the cracks during a busy season.
Guarantees only mean something if a company actually honors them, so here's exactly what ours covers.
Details vary by job type and are always shared upfront, never buried in fine print.
If a competitor's written quote for the same scope of work is genuinely lower, ask us about it.
A technician doesn't consider the job done until the system is tested and performing correctly.
A little attention to how your system is running can save you a lot of money and discomfort.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
If some rooms stay hot or cold no matter what the thermostat says, the system may be struggling to distribute air evenly.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
Repeated repairs on an aging system are usually the clearest sign that replacement will save more money than another patch job.
No inflated "emergency surcharge" games — the number we quote is the number you pay.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
If something isn't right after we leave, we come back and make it right.
We run background checks because you're letting someone into your home.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
A snapshot of the feedback that keeps us accountable.
"Our AC quit on the hottest weekend of the year and they had a tech out within a couple of hours. The pricing was exactly what they quoted over the phone."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. Techs are always polite, always on time, and clean up after themselves."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. New system is noticeably quieter and our energy bill actually dropped."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Kept our kitchen running through the weekend rush."
"The estimate matched the final invoice exactly, down to the dollar. Installation crew was in and out in a day and left the space cleaner than they found it."
"Diagnosed a failed capacitor and had it swapped within the hour. Genuinely relieved to have found a crew that answers when it matters."
After thousands of service calls across Kenmore, a handful of causes show up again and again.
Homeowners who schedule a tune-up ahead of each season tend to call us far less often for emergency repairs. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Clearing debris, leaves, and overgrown landscaping away from an outdoor condenser unit gives it room to breathe and keeps it running efficiently. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Kenmore area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Manufacturer-certified across multiple major residential equipment lines.
Keeps the emergency truck stocked based on what actually fails most often locally.
Works directly with Kenmore property managers to schedule around business hours.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Yes — every job gets a clear quote before any repair work begins, so there are no surprise line items on the invoice.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
We maintain current credentials because it protects both our customers and our team.
We never push a replacement when a straightforward repair will genuinely solve the problem.
Ask your technician about current plan pricing during any service call.
We cover Kenmore and the surrounding communities, including the zip codes listed in our coverage section below.
Yes, we run separate residential and commercial divisions, both fully licensed and equipped for their respective equipment.
Our technicians are trained across the major residential and commercial equipment lines, not limited to a single manufacturer.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Systems that run harder due to heavy year-round use may benefit from more frequent check-ins.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
We'd rather quote it honestly on the phone than have you feel ambushed by the bill.
Most standard repairs are completed in under two hours once the technician has diagnosed the issue and you've approved the quote.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
Housing stock varies a lot across Kenmore — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Kenmore.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Kenmore installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
If your address falls within Kenmore, WA and near Kenmore, there's a strong chance we already service your street.
Property managers with multiple Kenmore addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
