Our Kenmore-based crews carry the parts and the know-how to get your air moving again today. Emergency dispatch available across Kenmore and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
A licensed technician arrives, runs a full diagnostic, and explains exactly what's wrong in plain language.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. Every technician we send to your door is background-checked, factory-trained, and licensed to work on the systems installed throughout Kenmore, WA.
We're not the biggest name in Kenmore — we're the crew that answers the phone at 2am when your furnace quits in the middle of a cold snap. Licensing and insurance aren't optional line items for us, and we keep that documentation available on request for every job, residential or commercial.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes the parts we stock on the truck — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Kenmore is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Kenmore rooftop unit. We keep parts inventory stocked based on what actually fails most often on Kenmore's housing stock.
Whether it's a mid-summer breakdown or a planned system replacement, our Kenmore techs handle it with the same level of care.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Kenmore dispatch team moves emergency tickets to the front of the schedule so a technician is diagnosing your system as fast as physically possible.
We keep the truck stocked with the parts that fail most often on the equipment common to Kenmore homes, which is exactly why most repairs don't require a return visit.
An aging system that's constantly breaking down usually costs more to keep patching than to replace. We walk Kenmore homeowners through efficiency ratings and how they translate into real monthly savings before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
A retail floor, a restaurant kitchen, or an office suite can't run without stable climate control. Our commercial division services multi-zone commercial buildouts across Kenmore, with priority response for facilities that can't afford downtime.
Property managers working with multiple Kenmore locations can set up a standing account so every site gets consistent service history and pricing.
A seasonal tune-up catches the kind of wear that turns into a mid-summer no-cool call. Beyond standard tune-ups, we also handle humidifier, dehumidifier, and air purifier installation for Kenmore households that want more than just temperature control.
Maintenance plan members in Kenmore get scheduling reminders automatically, so tune-ups don't fall through the cracks during a busy season.
This is the standard every Kenmore technician on our team is held to.
If the same issue returns within the warranty period, we come back and fix it at no additional labor cost.
If a competitor's written quote for the same scope of work is genuinely lower, ask us about it.
Our office follows up after major repairs and installs to confirm everything is holding.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
Weak airflow from the vents often traces back to a clogged filter, a failing blower motor, or leaking ductwork.
A tune-up often identifies exactly what's driving the extra energy use.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
We'll always tell you honestly when a repair is the better call versus when it isn't.
You'll know the cost before a wrench touches your system.
Dispatchers give you a realistic arrival window instead of a vague "sometime today".
We don't consider a job finished until the system is actually performing correctly.
We run background checks because you're letting someone into your home.
Photos and plain-language notes accompany every diagnostic.
We'll walk you through what's actually available before you decide.
A snapshot of the feedback that keeps us accountable.
"I called three other companies first and this was the only one that actually picked up. No pressure to buy a whole new system when a repair was all we needed."
"Scheduled a fall tune-up and they caught a cracked part before it became a real problem. You can tell these guys actually know what they're doing."
"Had a full system replacement done and it was the smoothest home project I've had in years. New system is noticeably quieter and our energy bill actually dropped."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Kept our kitchen running through the weekend rush."
"I appreciated that they didn't try to sell me a bigger unit than I needed. My energy bill dropped noticeably the first month with the new system."
"The tech walked me through what he was checking as he went, which I really appreciated. This is the company I'm saving in my phone now."
None of these are unusual or embarrassing — they're just the normal wear and tear that comes with running a system through Kenmore's seasonal swings.
Homeowners who schedule a tune-up ahead of each season tend to call us far less often for emergency repairs. Before the coldest stretch of the year, a heating system benefits from a full safety inspection, checking the heat exchanger, ignition system, and airflow to catch any issue that could turn into a no-heat emergency.
Simple habits between professional visits also matter. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Our technicians train across the major residential and commercial equipment lines, so you're not limited to a single brand's service network. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
We don't outsource dispatch to a call center that's never met our technicians.
Over a decade in residential heating and cooling, with a focus on load calculations and full system replacements.
Keeps the emergency truck stocked based on what actually fails most often locally.
Focuses on commercial rooftop units, multi-zone systems, and facility maintenance contracts.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
Yes — every job gets a clear quote before any repair work begins, so there are no surprise line items on the invoice.
Our emergency line runs 24 hours a day, including nights, weekends, and holidays.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
As a general guideline, if a system is past 12-15 years old and facing a costly repair, replacement often makes more financial sense.
Ask your technician about current plan pricing during any service call.
Our dispatch area extends throughout the greater Kenmore region and nearby towns within Kenmore, WA.
Property managers and business owners can request a dedicated point of contact for ongoing service.
Yes, we service systems regardless of who originally installed them.
Ask about financing during your in-home estimate to see what fits your situation.
Most Kenmore homes benefit from two tune-ups a year — one before cooling season and one before heating season.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
Most standard repairs are completed in under two hours once the technician has diagnosed the issue and you've approved the quote.
For commercial accounts or rental properties, a designated point of contact or property manager can coordinate access instead.
From the older, established streets near the center of Kenmore to the newer developments on the outskirts, our trucks cover the full footprint of the city.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Kenmore.
A full system replacement is one of the bigger home expenses most people face, and we don't expect everyone to pay it in a single lump sum. If a rebate or local incentive program applies to your Kenmore installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
Coverage extends across Kenmore proper and into the nearby zip codes listed below.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
